Wmphe Single Steering Shaft Universal U Joint 3/4”-36 Spline To 1” Dd, 83Mm (3-1/4”) Working Angle 35Degree

Description

Product Specifications: Steering Universal Joint, 3/4”-36 Spline X 1 Dd, Total Length: 83Mm (3-1/4”), Working Angle: 35Degree, Rotational/ Operating Speed: 4000Rpm. Product : 1. Wmphe Single Steering Shaft Universal U Joint Is Very Suitable For Steering Applications Of Automobiles And Is Precisely Manufactured For Steering Shafts. This U-Joint Is Made Of Solid Stainless Steel, Outer Black Paint-Plated Finish On The Outside For Some Corrosion And Rust Resistance Against Humidity And Ph. 2. You Can Use It On The Steering Column Of The Car To The Steering Box, These U- Joints Use Needle Roller Bearings, Which Run Smoothly And Reliably, And Realize The Variable Angle And Power Transmission Between The Rotating Shafts. 3. Universal U- Joint Connector, Just Check Our Size Pictures Carefully To Verify The Size You Need, This Is Universal, But Sometimes Requires Some Modification Or Manufacturing, Please Confirm Whether It Is Suitable For Your Car Or Equipment Before Purchasing. 4. Note: The Dd Shaft Is A Flat Surface With Semicircular End, The Spline End Is Round With 36 Teeth. If You Use More Than Two Universal Joints In Your System, You Must Use A Support Handle. If You Also Need To Achieve A Larger Angle, It Is Recommended To Add Another U Joint. 5. It Is Very Easy To Install, You Just Need To Open The Front Of The Steering Wheel Under The Hood, Check And Find The Steering Shaft On The Transmission System, Remove The Old U-Joint, Replace It With A New One And Fix The Screws And Nuts To Complete. Professional Installation Is Recommended, And Relevant Professionals Can Be Sought. Package: 1 Pcs 3/4 -36 Spline X 1 Dd U-Joint