Carmocar 6.0L Oil Cooler Flush Kit With Black Aluminum Anodize Adapter Replacement For Ford 2003 2004 2005 2006 2007 2008 2009 2

Description

Specificationbrand: Carmocarfit For:6.0L Oil Cooler Flush Kit Replacement For Ford 2003-2010 Dieselfinish:Black Aluminum Anodize Adapterpackage Includes: 1X 6.0L Oil Cooler Flush Kit,Required Brass Fittings, Hosefeatures 1.Re-Assemble The Vehicle To It’S Original Condition, Fill The System With The Proper Concentration Of The Correct Coolant, And Bleed The Air From The Cooling System. Then Carefully Check For Any Leaks. 2.Operate The Vehicle Under Load And Compare Engine And Coolant Temperature (Delta T) To Verify That The Oil Cooler Is Restored To Full Function. 3.When Using The Flush Adapter, Prevent Water From Flowing Into The Cooler, So That 100% Of The Water Power Passes Directly Through The Cooler To Achieve The Greatest Cleaning Effect.Instruction: 1.Drain The Cooling System Completely Of The Vehicle. 2.Remove The Rear Coolant Manifold Cover From The Top Of The Oil Cooler Cover By Removing T-30 Torx Head Bolts. 3.Install The Flush Adapter In Place Of The Coolant Manifold Cover And Replacement For The Two T-30 Bolts. 4.The 45 Degree Brass Elbow Into The Flush Adapter. 5.The Flush Hose Assembly Into The 45 Degree Adapter. 6.Remove The Lower Radiator Hose And Place A Large Clean Receptacle Under The Open End Of The Hose. 7.Connect A Garden Hose To The Flush Adapter And Flush Until The Water Coming Out Of The Lower Hose Runs Clear.